A250 wITH CLEVIS

Rod end fitting not included with base cylinder

For stainless steel option, add (S) to end of any above part number. Example: A250S***-010.
Nutted pins standard -60 and above, nutted pins available on smaller sizes
Other custom cylinder configurations available.

A250 wITH BARREL PIN

351 New Whitfield St Guilford, CT 06437-3400  USA   (203) 458-3163 Fax (203) 458-9291    info@navtec.net

cylinders

Part Number Stroke Pull Force @ 5,000 PSI Pull Force @ 250 BAR Body Diameter Rod Thread Oil Volume
  in mm lbs kg lbs kg in mm   Quart L
A250-S**-006 9.0 229 5,800 2,632 4,206 1,908 1.66 42.2 1/2-20 0.1 0.1
A250-L**-006 13.5 343 5,800 2,632 4,206 1,908 1.66 42.2 7/16-20 0.1 0.1
A250-F**-006 20.0 508 5,800 2,632 4,206 1,908 1.66 42.2 7/16-20 0.2 0.2
A250-S**-010 9.0 229 5,800 2,632 4,206 1,908 1.66 42.2 1/2-20 0.2 0.2
A250-L**-010 13.5 343 5,800 2,632 4,206 1,908 1.66 42.2 1/2-20 0.3 0.3
A250-F**-010 20.0 508 5,800 2,632 4,206 1,908 1.66 42.2 1/2-20 0.4 0.4
A250-S**-012 9.5 241 7,600 3,448 5,512 2,501 2.00 50.8 5/8-18 0.3 0.2
A250-L**-012 14.2 361 7,600 3,448 5,512 2,501 2.00 50.8 5/8-18 0.4 0.4
A250-F**-012 23.9 607 7,600 3,448 5,512 2,501 2.00 50.8 5/8-18 0.6 0.6
A250-S**-017 9.5 241 10,900 4,946 7,905 3,587 2.25 57.2 5/8-18 0.4 0.3
A250-L**-017 14.2 361 10,900 4,946 7,905 3,587 2.25 57.2 5/8-18 0.5 0.5
A250-F**-017 30.0 762 10,900 4,946 7,905 3,587 2.25 57.2 5/8-18 1.1 1.1
A250-S**-022 10.0 254 13,900 6,307 10,080 4,574 2.50 63.5 3/4-16 0.5 0.5
A250-L**-022 15.0 381 13,900 6,307 10,080 4,574 2.50 63.5 3/4-16 0.7 0.7
A250-F**-022 35.0 889 13,900 6,307 10,080 4,574 2.50 63.5 3/4-16 1.7 1.6
A250-S**-030 11.0 279 22,100 10,027 16,027 7,272 3.25 82.6 7/8-14 0.8 0.8
A250-L**-030 16.5 419 22,100 10,027 16,027 7,272 3.25 82.6 7/8-14 1.3 1.2
A250-F**-030 40.0 1016 22,100 10,027 16,027 7,272 3.25 82.6 7/8-14 3.1 2.9
A250-S**-040 12.0 305 32,200 14,610 23,351 10,595 4.00 101.6 1-12 1.3 1.3
A250-L**-040 18.0 457 32,200 14,610 23,351 10,595 4.00 101.6 1-12 2.0 1.9
A250-F**-040 45.2 1148 32,200 14,610 23,351 10,595 4.00 101.6 1-12 5.0 4.8
A250-S**-060 13.9 353 42,900 19,465 31,111 14,116 4.50 114.3 1 1/4-12 2.1 2.0
A250-L**-060 21.0 533 42,900 19,465 31,111 14,116 4.50 114.3 1 1/4-12 3.1 3.0
A250-S**-076 15.0 381 42,900 19,465 31,111 14,116 4.50 114.3 1 1/4-12 2.2 2.1
A250-L**-076 22.5 572 42,900 19,465 31,111 14,116 4.50 114.3 1 1/4-12 3.3 3.2
A250-S**-090 16.0 406 57,700 26,180 41,844 18,985 5.50 139.7 1 1/4-12 3.2 3.0
A250-L**-090 24.0 610 57,700 26,180 41,844 18,985 5.50 139.7 1 1/4-12 4.8 4.5
A250-S**-110 18.0 457 73,200 33,212 53,085 24,086 6.00 152.4 1 3/8-12 4.6 4.3
A250-L**-110 27.0 686 73,200 33,212 53,085 24,086 6.00 152.4 1 3/8-12 6.9 6.5
Max Relief Setting is 5,000 psi

Hydraulic Cylinders


Minimal windage. Maximum reliability. Navtec standard cylinder rods are made from 316 stainless steel. Tubes, lower clevis and caps are made of black hard-coated aluminum. Cylinder bores are specially polished for longer seal life. Navtec stainless steel cylinders represent the highest standard of performance worldwide, with 316 stainless construction throughout. Standard, Long, and Flattening Reef versions are available. Titanium componentry optional.


Part Number Length Closed Weight (Dry) Pin Gap
  in mm lbs kg in mm in mm
A250-SCL-006 16.2 411 1.7 0.8 1/2 12.7 1/2 12.7
A250-LCL-006 20.7 526 2.2 1.0 7/16 11.1 7/16 11.1
A250-FCL-006 29.3 744 3 1.4 4/9 11.1 4/9 11.1
A250-SCL-010 17.3 439 2.6 1.2 1/2 12.7 1/2 12.7
A250-LCL-010 22.6 574 3.2 1.5 1/2 12.7 1/2 12.7
A250-FCL-010 30.4 772 4.4 2.0 1/2 12.7 1/2 12.7
A250-SCL-012 18.9 480 4.3 2.0 5/8 16.0 5/8 16.0
A250-LCL-012 23.6 599 5.3 2.4 5/8 16.0 5/8 16.0
A250-FCL-012 35.6 904 7.9 3.6 5/8 16.0 5/8 16.0
A250-SCL-017 19.1 485 5.0 2.3 5/8 15.9 5/8 15.9
A250-LCL-017 23.8 605 6.0 2.7 5/8 15.9 5/8 15.9
A250-FCL-017 42.4 1077 10.5 4.8 5/8 15.9 5/8 15.9
A250-SCL-022 20.3 516 6.7 3.0 3/4 19.1 3/4 19.1
A250-LCL-022 25.3 643 8.1 3.7 3/4 19.1 3/4 19.1
A250-FCL-022 48.9 1242 15 6.8 3/4 19.1 3/4 19.1
A250-SCL-030 22.6 574 12 5.4 7/8 22.2 7/8 22.2
A250-LCL-030 28.1 714 14.6 6.6 7/8 22.2 7/8 22.2
A250-FCL-030 55.4 1407 28.2 12.8 7/8 22.2 7/8 22.2
A250-SCL-040 24.9 632 19.5 8.8 1 25.4 1 25.4
A250-LCL-040 30.9 785 24 10.9 1 25.4 1 25.4
A250-FCL-040 62.1 1577 47.4 21.5 1 25.4 1 25.4
A250-SCL-060 28.8 732 29.8 13.5 1 1/4 31.8 1 1/4 31.8
A250-LCL-060 35.9 912 34.4 15.6 1 1/4 31.8 1 1/4 31.8
A250-SCL-076 30.5 775 32.8 14.9 1 1/4 31.8 1 5/16 33.3
A250-LCL-076 38 965 39.8 18.1 1 1/4 31.8 1 5/16 33.3
A250-SCL-090 32.2 818 48.6 22.1 1 3/8 34.9 1 3/8 34.9
A250-LCL-090 40.3 1024 63 28.6 1 3/8 34.9 1 3/8 34.9
A250-SCL-110 36.3 922 66 29.9 1 1/2 38.1 1 1/2 38.1
A250-LCL-110 45.3 1151 80.5 36.5 1 1/2 38.1 1 1/2 38.1
Part Number Length Closed Weight (Dry) Pin Gap
  in mm lbs kg in mm in mm
A250-SME-010 17 432 2.5 1.1 1/2 12.7 1/2 12.7
A250-LME-010 21.5 546 3.1 1.4 1/2 12.7 1/2 12.7
A250-FME-010 30.1 765 4.3 2.0 1/2 12.7 1/2 12.7
A250-SME-012 18.9 480 4.1 1.9 5/8 16.0 5/8 16.0
A250-LME-012 23.6 599 5.1 2.3 5/8 15.9 5/8 15.9
A250-FME-012 35.6 904 7.7 3.5 5/8 15.9 5/8 15.9
A250-SME-017 19.1 485 4.8 2.2 5/8 15.9 5/8 15.9
A250-LME-017 23.8 605 5.8 2.6 5/8 15.9 5/8 15.9
A250-FME-017 42.4 1077 10.3 4.7 5/8 15.9 5/8 15.9
A250-SME-022 20.3 516 6.4 2.9 3/4 19.1 3/4 19.1
A250-LME-022 25.3 643 7.8 3.5 3/4 19.1 3/4 19.1
A250-FME-022 48.9 1242 14.7 6.7 3/4 19.1 3/4 19.1
A250-SME-030 22.5 572 11.4 5.2 7/8 22.2 7/8 22.2
A250-LME-030 28 711 14 6.4 7/8 22.2 7/8 22.2
A250-FME-030 55.4 1407 27.6 12.5 7/8 22.2 7/8 22.2
A250-SME-040 24.9 632 18.8 8.5 1 25.4 1 25.4
A250-LME-040 30.9 785 23.2 10.5 1 25.4 1 25.4
A250-FME-040 62 1575 46.7 21.2 1 25.4 1 25.4
A250-SME-060 28.8 732 28.4 12.9 1 1/4 31.8 1 1/4 31.8
A250-LME-060 35.9 912 34.9 15.8 1 1/4 31.8 1 1/4 31.8
A250-SME-076 30.5 775 31.3 14.2 1 1/4 31.8 1 5/16 33.3
A250-LME-076 38 965 38.3 17.4 1 1/4 31.8 1 5/16 33.3
A250-SME-090 32.2 818 46.4 21.1 1 3/8 34.9 1 3/8 34.9
A250-LME-090 40.3 1024 60.8 27.6 1 3/8 34.9 1 3/8 34.9
A250-SME-110 36.3 922 64.3 29.2 1 1/2 38.1 1 1/2 38.1
A250-LME-110 45.3 1151 78.8 35.8 1 1/2 38.1 1 1/2 38.1

A250 wITH MARINE EYE

Part Number Length Closed Weight (Dry) Pin Gap
  in mm lbs kg in mm in mm
A250-SBP-010 17.3 439 2.8 1.3 1/2 12.7 1/2 12.7
A250-LBP-010 21.5 546 3.4 1.5 1/2 12.7 1/2 12.7
A250-FBP-010 30.1 765 4.6 2.1 1/2 12.7 1/2 12.7
A250-SBP-012 18.9 480 4.5 2.0 5/8 16.0 5/8 16.0
A250-LBP-012 23.6 599 5.4 2.5 1/2 12.7 1/2 12.7
A250-FBP-012 35.6 904 8.1 3.7 1/2 12.7 1/2 12.7
A250-SBP-017 19.1 485 5.3 2.4 5/8 15.9 5/8 15.9
A250-LBP-017 23.8 605 6.4 2.9 5/8 15.9 5/8 15.9
A250-FBP-017 42.4 1077 10.8 4.9 5/8 15.9 5/8 15.9
A250-SBP-022 20.3 516 7.2 3.3 3/4 19.1 3/4 19.1
A250-LBP-022 25.3 643 8.7 3.9 3/4 19.1 3/4 19.1
A250-FBP-022 49 1245 15.4 7.0 3/4 19.1 3/4 19.1
A250-SBP-030 22.6 574 13 5.9 7/8 22.2 7/8 22.2
A250-LBP-030 28 711 15.6 7.1 7/8 22.2 7/8 22.2
A250-FBP-030 55.4 1407 29.2 13.2 7/8 22.2 7/8 22.2
A250-SBP-040 24.9 632 21.2 9.6 1 25.4 1 25.4
A250-LBP-040 30.9 785 25.7 11.7 1 25.4 1 25.4
A250-FBP-040 62.1 1577 49.1 22.3 1 25.4 1 25.4
A250-SBP-060 28.8 732 32.1 14.6 1 1/4 31.8 1 1/4 31.8
A250-LBP-060 35.9 912 38.8 17.6 1 1/4 31.8 1 1/4 31.8
A250-SBP-076 30.5 775 36.9 16.7 1 1/4 31.8 1 5/16 33.3
A250-LBP-076 38.2 970 44 20.0 1 7/16 36.5 1 7/16 36.5
A250-SBP-090 32.2 818 53.1 24.1 1 3/8 34.9 1 3/8 34.9
A250-LBP-090 40.4 1026 67.6 30.7 1 5/8 41.3 1 5/8 41.3
A250-SBP-110 36.3 922 74.2 33.7 1 1/2 38.1 1 1/2 38.1
A250-LBP-110 45.3 1151 88.9 40.3 1 3/4 44.5 1 3/4 44.5

cylinders