cylinders

Hydraulic Cylinders


Minimal windage. Maximum reliability. Navtec standard cylinder rods are made from 316 stainless steel. Tubes, lower clevis and caps are made of black hard-coated aluminum. Cylinder bores are specially polished for longer seal life. Navtec stainless steel cylinders represent the highest standard of performance worldwide, with 316 stainless construction throughout. Standard, Long, and Flattening Reef versions are available. Titanium componentry optional.


CYLINDER SIZE MAX PULL FORCE @ RELIEF BODY DIAMETER ROD THREAD (UNF 2A) CLEVIS PIN & GAP
lbs kg in mm   in mm
             
-6 3,200 1,450 1.32 33.5 7/16-20 7/16 11.1
-10 5,800 2,630 1.66 42.2 1/2-20 1/2 12.7
-12 7,600 3,450 2.00 50.8 5/8-18 5/8 15.9
-17 10,900 4,940 2.25 57.2 5/8-18 5/8 15.9
-22 13,900 6,300 2.50 63.5 3/4-16 3/4 19.1
-30 22,100 10,020 3.25 82.6 7/8-14 7/8 22.2
-40 32,200 14,610 4.00 101.6 1-12 1 25.4
-48 32,200 14,610 4.00 101.6 1-12 1 1/8 28.6
-60 42,900 19,460 4.50 114.3 1 1/4-12 1 1/4 31.8
-76 42,900 19,460 4.50 114.3 1 1/4-12 SEE NOTE *
-90 57,700 26,170 5.50 139.7 1 1/4-12 1 3/8 34.9
-110 73,200 33,200 6.00 152.4 1 3/8-12 1 1/2 38.1
-150 90,600 41,100 7.00 177.8 1 1/2-12 1 3/4 44.5
Max relief setting is 5,000 psi.
* PIN = 1 1/4 (31.8mm), GAP = 1 5/16 (33.3mm)
PART NUMBER STROKE LENGTH CLOSED WEIGHT STD ALUMINUM
in mm in mm lbs kg
           
A250-SE-006 9.0 229 18.7 474 1.9 0.86
A250-LE-006 13.5 343 23.2 589 2.3 1.04
A250-FE-006 20.2 513 29.9 759 3.2 1.44
A250-SE-010 9.0 229 19.5 495 2.7 1.24
A250-LE-010 13.5 343 24.0 609 3.3 1.49
A250-FE-010 20.0 509 31.1 789 5.0 2.27
A250-SE-012 9.5 241 21.1 536 4.4 2.01
A250-LE-012 14.2 361 25.8 656 5.6 2.54
A250-FE-012 24.1 611 36.1 916 8.6 3.92
A250-SE-017 9.5 241 21.2 539 5.1 2.31
A250-LE-017 14.2 361 25.9 659 6.3 2.84
A250-FE-017 30.0 763 42.9 1090 10.7 4.87
A250-SE-022 10.0 254 23.2 589 7.2 3.26
A250-LE-022 15.0 381 28.2 717 8.6 3.89
A250-FE-022 35.0 890 49.4 1255 15.4 6.99
A250-SE-030 11.0 279 26.6 675 12.6 5.71
A250-LE-030 16.5 419 32.1 814 15.4 6.98
A250-FE-030 40.0 1016 56.4 1433 30.0 13.61
A250-SE-040 12.0 305 28.6 726 20.3 9.22
A250-LE-040 18.0 457 34.6 879 24.8 11.26
A250-FE-040 45.2 1148 63.2 1606 44.0 19.96
A250-SE-048 12.0 305 28.8 733 20.9 9.48
A250-LE-048 18.0 457 34.8 885 25.4 11.52
A250-SE-060 13.9 353 32.5 827 33.0 14.97
A250-LE-060 21.0 533 39.7 1007 38.0 17.24
A250-SE-076 15.0 381 34.0 863 35.8 16.24
A250-LE-076 22.5 572 41.5 1054 42.9 19.46
A250-SE-090 16.0 406 36.1 917 50.0 22.68
A250-LE-090 24.0 609 44.1 1120 61.4 27.85
A250-SE-110 18.0 457 40.2 1022 67.5 30.62
A250-LE-110 27.0 686 49.2 1250 82.0 37.19
A250-SE-150 18.0 457 41.7 1060 97.5 44.23
A250-LE-150 27.0 686 50.7 1288 117.0 53.07
SE = standard cylinder, LE = long cylinder, FE = flattening reef cylinder.
For stainless steel option, add (S) to end of any above part number. Example: A250SSE-010.
Nutted pins standard -60 and above, nutted pins available on smaller sizes
Other custom cylinder configurations available.

cylinders

351 New Whitfield St Guilford, CT 06437-3400  USA   (203) 458-3163 Fax (203) 458-9291    info@navtec.net

Rod end fitting not included in base cylinder.