VANG SIZE MAX PULL FORCE RETURN FORCE ROD DIAMETER CLEVIS PIN & GAP
lbs kg lbs kg in mm in mm
               
-6 1,935 880 475 220   5/8 15.9   7/16 11.1
-10 3,785 1,720 815 370   3/4 19.1   1/2 12.7
-12 5,100 2,310 1,100 500   7/8 22.2   5/8 15.9
-17 7,010 3,180 1,490 680 1 25.4   5/8 15.9
-22 10,265 4,660 1,935 880 1 25.4   5/8 15.9
-30 15,890 7,210 3,010 1,370 1  1/4 31.8   3/4 19.1
-40 25,670 11,640 4,330 1,960 1  1/4 31.8   7/8 22.2
-60 34,320 15,570 5,880 2,670 1  1/2 38.1 1 25.4
-90 42,340 19,210 7,660 3,470 1  7/8 47.6 1  1/4 31.8
-110 53,220 24,140 9,680 4,390 2  1/8 54.0 1  3/8 34.9
-150 65,370 29,650 11,930 5,410 2  3/8 60.3 1  1/2 38.1
-195 84,520 38,340 15,580 7,070 2  3/4 69.9 1  3/4 44.5
-260 109,090 49,480 20,110 9,120 3  1/8 79.4 2 50.8
-400 168,400 76,380 30,400 13,790 3  3/4 95.3 2  5/8 66.7

M Series Vang


The M Series Vang incorporates an M Series Cylinder with a carbon fi ber/ Kevlar extension tube to produce a unit that operates in the same way as the Navtec Light Vangs. The standard version uses an internal tie rod to carry the  tension load, while a gas-charged option is available where return pressure is required. Removing the tie rod reduces weight, with the carbon/Kevlar tube carrying both the tension and compression loads. In this instance, the tube is glued permanently to the cylinder and the clevis. The Navtec M52 Vang is suitable for use in predominately light sailing conditions, while the Navtec M64 Vang is suitable for use on larger boats where the loads are higher.

A850 Hydraulic Super Yacht Vang (Alloy)


The Navtec Alloy Hydraulic Superyacht Vang features a coaxial feed through the rod so both the push and pull hydraulic connections are located on the oil jaw. In addition, the A850 Vang can be equipped with the position indication function, to ensure that the correct angle for the furling boom is achieved

• Substantial weight saving over Aluminum and Stainless Steel models
• Seamless, tapered, one-piece tube
• Smaller overall diameter than Aluminum and Stainless Steel models
• Carbon fi ber weave or bespoke painted fi nish
• Available with push/pull or gas return options
• Position indicating feature available on request
• Both hydraulic connections for push/pull vang in oil jaw
• Custom clevis designs available for streamline connections


  in cm
CABLE LENGTH   78 37/50 200.0
       
RESISTANCE (KΩ)   44      total span
       
RESISTIVE TOLERANCE   +/-20%  
       
ACCURACY   STD BEST
  mm +/-.38 +/-.75
  in +/-.015 +/-.030
       
POWER RATING (watts)   5.5 @ 70°C 0 @ 125°C
       
OPERATING RANGE   MIN MAX
  °C -40      125.0
  °F -40      257.0
PART NUMBER STROKE AVAILABLE PCLC AVAILABLE PCLC
STANDARD VANG POSITION-INDICATING MIN MAX
in mm in mm in mm
                 
A850-VC-006 N/A 9 228.6 46 1168 60 1524
A850-VC-010 N/A 9 228.6 55 1397 72 1829
A850-VC-012 N/A 10 241.3 55 1397 89 2261
A850-VC-017 A850-PI-017 10 241.3 56 1422 100 2540
A850-VC-022 A850-PI-022 10 254.0 58 1473 104 2642
A850-VC-030 A850-PI-030 11 279.4 61 1549 107 2718
A850-VC-040A A850-PI-040A 12 304.8 70 1778 150 3810
A850-VC-060C A850-PI-060A 14 355.6 78 1981 175 4445
A850-VC-090C A850-PI-090A 16 406.4 85 2159 185 4699
A850-VC-110B A850-PI-110 18 457.2 90 2286 190 4826
A850-VC-150A A850-PI-150 18 457.2 99 2515 195 4953
A850-VC-195 A850-PI-195 18 457.2 110 2794 360 9144
A850-VC-260 A850-PI-260 18 457.2 98 2489 360 9144
PART NUMBER STROKE AVAILABLE PCLC AVAILABLE PCLC
MIN MAX
Alloy P/P PI in mm in mm in mm
             
A850-PI-PP-090 16.00 406.4 88 2235 185 4699
A850-PI-PP-110 18.00 457.2 94 2388 190 4826
A850-PI-PP-150 18.00 457.2 96 2438 195 4953
A850-PI-PP-195 18.00 457.2 98 2489 360 9144
A850-PI-PP-260 18.00 457.2 105 2667 360 9144
A850-PI-PP-400 19.00 482.6 99 2515 360 9144
PART NUMBER STROKE AVAILABLE PCLC AVAILABLE PCLC
MIN MAX
Carbon P/P PI in mm in mm in mm
             
A950-PI-PP-090 16.00 406.4 88 2235 192 4877
A950-PI-PP-110 18.00 457.2 94 2388 198 5029
A950-PI-PP-150 18.00 457.2 100 2540 220 5588
A950-PI-PP-195 18.00 457.2 100 2540 220 5588
A950-PI-PP-260 20.67 525.0 105 2667 284 7214
A950-PI-PP-400 20.67 525.0 114 2896 300 7620

boom vangs

a950 hydraulic super yacht vang (carbon)

The Navtec Carbon Fiber Superyacht Vang delivers the same performance, reliability, and quality that owners and designers have come to rely on from the Aluminum and Stainless Steel models, but with a substantial weight saving. The longer the vang, the larger the weight saving, resulting in an easier vang to install and maintain.

position-indicating vang electrical

Originally developed for super yachts, this unique feature is now available on all Navtec vangs down to -22. The position indicating unit is essential for achieving the correct angle for the new furling booms that have become common on boats from 50 feet and up. The Position Indicating Vang can be interfaced with most marine electronics.

a850 hydraulic vang cylinder

Navtec’s Series 850 Vang features an extra-large piston rod to resist buckling with no tackle to clutter the deck layout. It also provides boom lift in light airs and acts as a topping lift when the sail is flaked. The A850 can be integrated with an A440 Push Button Quick Release Valve, proving the ability to instantaneously dump the vang when required.

351 New Whitfield St Guilford, CT 06437-3400  USA   (203) 458-3163 Fax (203) 458-9291    info@navtec.net