j100 Toggles




ROD SIZE PART NUMBER PIN A B C D E F
    in mm in mm in mm in mm in mm in mm in mm
-4 J200-1010 0.311 7.90 0.32 8.2 0.50 12.7 0.30 7.6 0.75 19.1 1.41 35.7 0.31 8.0
-6 J200-1212 0.373 9.47 0.39 9.8 0.63 15.9 0.41 10.4 1.00 25.4 1.63 41.4 0.38 9.5
-8 J200-1414 0.433 11.00 0.45 11.4 0.64 16.3 0.39 9.9 1.00 25.4 1.68 42.7 0.44 11.1
-10 J200-1616 0.495 12.57 0.52 13.2 0.78 19.8 0.50 12.7 1.25 31.8 2.05 52.1 0.50 12.7
-12 J200-2020 0.620 15.75 0.65 16.4 0.93 23.5 0.55 14.0 1.60 40.6 2.28 57.8 0.63 15.9
-15 J200-2020 0.620 15.75 0.65 16.4 0.93 23.5 0.55 14.0 1.60 40.6 2.28 57.8 0.63 15.9
-17 J200-2020 0.620 15.75 0.65 16.5 0.93 23.5 0.55 14.0 1.60 40.6 2.28 57.8 0.63 15.9
-22 J200-2424 0.745 18.92 0.77 19.6 1.19 30.2 0.91 23.1 2.00 50.8 2.63 66.7 0.75 19.1
-30 J200-2828 0.870 22.10 0.90 22.7 1.19 30.2 0.95 24.1 2.00 50.8 3.20 81.3 0.88 22.2
-40 J200-3232 0.995 25.27 1.04 26.4 1.45 36.8 1.00 25.4 2.50 63.5 3.63 92.2 1.00 25.4
-48 J200-3636 1.120 28.45 1.17 29.6 1.45 36.8 1.13 28.7 2.50 63.5 4.00 102 1.02 25.9
-60 J200-4040 1.245 31.62 1.29 32.8 1.82 46.2 1.46 37.1 3.00 76.2 5.00 127 1.25 31.8
-76 J200-4040 1.245 31.62 1.29 32.8 1.82 46.2 1.46 37.1 3.00 76.2 5.00 127 1.25 31.8
-91 J200-4444 1.370 34.80 1.42 36.1 1.82 46.2 1.51 38.4 3.00 76.2 5.60 142 1.33 33.8
-115 J200-5050 1.558 39.57 1.63 41.4 2.25 57.2 1.98 50.2 3.75 95.3 6.18 157 1.52 38.6
-150 J200-5656 1.745 44.32 1.81 46.1 2.43 61.7 2.32 58.9 4.00 101.6 7.09 180 1.63 41.3
-170 J200-6060 1.870 47.50 1.93 49.0 3.13 79.5 2.54 64.6 5.00 127.0 7.20 183 1.90 48.3
-195 J200-6868 2.120 53.85 2.19 55.6 3.35 85.1 2.28 57.8 5.50 139.7 7.53 191 2.00 50.8
-220 J200-7272 2.245 57.02 2.38 60.5 3.70 94.0 2.81 71.4 6.00 152.4 8.16 207 2.27 57.7
-260 J200-7878 2.433 61.80 2.50 63.5 3.50 88.9 2.92 74.3 6.00 152 7.52 191 2.43 61.6
Nutted pins standard -60 and above, nutted pins available on smaller sizes
ROD SIZE PART       NUMBER THREAD SIZE LOA
in mm
         
-4 D500-004-10 5/16" 3.17 80.5
-6 D500-006-12 3/8' 3.60 91.4
-8 D500-008-14 7/16" 3.94 100.1
-10 D500-010-16 1/2" 4.58 116.3
-12 D500-012-16 1/2" 4.58 116.3
-15 D500-015-20 5/8" 5.52 140.2
-17 D500-017-20 5/8' 5.52 140.2
-22 D500-022-24 3/4" 6.48 164.6
-30 D500-030-28 7/8" 7.35 186.7
-40 D500-040-32 1" 8.14 206.8
-48 D500-048-36 1 1/8" 8.75 222.3
-60 D500-060-40 1 1/4" 8.97 227.8
ROD     SIZE WIRE SIZE COVER         PART NUMBER NAVTEC  ROD OR WIRE TURNBUCKLE PART NUMBER GIBB METRIC WIRE TURNBUCKLE PART NUMBER GIBB IMPERIAL WIRE TURNBUCKLE PART NUMBER GIBB ROD TURNBUCKLE PART NUMBER TUBE I.D. LENGTH*
mm in in mm in mm
                   
-8     D550-CA-008 C550-081416     N690-081414 1.055 26.80 21.7 550
-8     D550-CA-008 C550-081616     N690-081616 1.055 26.80 21.7 550
    7/32 D550-CA-008     N673-071414   1.055 26.80 21.7 550
  6    D550-CA-008   N673-M061414     1.055 26.80 21.7 550
    1/4 D550-CA-008 C500-081416   N673-081414   1.055 26.80 21.7 550
    1/4 D550-CA-008     N673-081616   1.055 26.80 21.7 550
-10     D550-CA-010 C550-101616     N690-101616 1.055 26.80 21.7 550
  7  9/32 D550-CA-010   N673-M071414 N673-091414   1.055 26.80 21.7 550
  7  9/32 D550-CA-010 C500-091616 N673-M071616 N673-091616   1.055 26.80 21.7 550
-12     D550-CA-012 C550-121620     N690-121616 1.055 26.80 23.9 606
  8  5/16 D550-CA-012 C500-101620 N673-M081616 N673-101616   1.055 26.80 23.9 606
                       
-12     D550-CA-015       N690-122020 1.305 33.15 25.3 642
-15     D550-CA-015 C550-152020     N690-152020 1.305 33.15 25.3 642
-17     D550-CA-017 C550-172020     N690-172020 1.305 33.15 25.3 642
  8  5/16 D550-CA-017   N673-M082020 N673-102020   1.305 33.15 25.3 642
    3/8 D550-CA-017 C500-122020   N673-122020   1.305 33.15 25.3 642
-22     D550-CA-022 C550-222424       1.305 33.15 27.1 688
  10    D550-CA-022   N673-M102020     1.305 33.15 27.1 688
    7/16 D550-CA-0437 C500-142424       1.305 33.15 27.1 688
                       
-22     D550-CA-022N       N690-222424 1.527 38.79 31.7 804
-30     D550-CA-030 C550-302828       1.527 38.79 31.7 804
    7/16 D550-CA-030     N673-142424   1.527 38.79 31.7 804
  12    D550-CA-0500   N673-M122424     1.527 38.79 31.7 804
    1/2 D550-CA-0500 C500-162828   N673-162424   1.527 38.79 31.7 804
                       
-40     D550-CA-040 C550-403232       1.620 41.15 37.1 942
  14  9/16 D550-CA-040 C500-182828       1.620 41.15 37.1 942
    5/8 D550-CA-0625 C500-203232       1.620 41.15 37.1 942
                       
-30     D550-CA-030N       N690-302828 1.902 48.31 39.8 1,010
-48     D550-CA-048 C550-483636       1.902 48.31 39.8 1,010
  14  9/16 D550-CA-048   N673-M142828 N673-182828   1.902 48.31 39.8 1,010
                       
-40     D550-CA-040N       N690-403232 2.130 54.10 42.9 1,089
-60     D550-CA-060 C550-604040       2.130 54.10 42.9 1,089
  16  5/8 D550-CA-060   N673-M163232 N673-203232   2.130 54.10 42.9 1,089
-76     D550-CA-076 C550-763640L       2.130 54.10 45.5 1,155
    3/4 D550-CA-076 C500-244040       2.130 54.10 45.5 1,155
                       
-91     D550-CA-091 C550-914044L       2.370 60.20 47.5 1,205
  19  3/4 D550-CA-091   N673-M193636 N673-243636   2.370 60.20 47.5 1,205
                       
-115     D550-CA-115 C550-A24450L       2.620 66.55 52.5 1,334
  22  7/8 D550-CA-115   N673-M224040 N673-284040   2.620 66.55 52.5 1,334
*Length is the internal length of turnbuckle cover
ROD SIZE THREAD STANDARD SCREW PART NUMBER S-LOA LONG SCREW PART NUMBER L-LOA THREAD LENGTH
in mm in mm in mm
             
-4 1/4"-28 D340-S08 4.20 106.7 D340-L08 7.00 177.8 2.72 69.1
-4/-6/-8 5/16"-24 D340-S10 4.40 111.8 D340-L10 7.40 188.0 3.00 76.2
-10 3/8"-24 D340-S12 5.85 148.6 D340-L12 9.60 243.8 3.74 95.0
-12 7/16"-20 D340-S14 6.50 165.1 D340-L14 10.86 275.8 4.37 111.0
-15/-17 1/2"-20 D340-S16 7.00 177.8 D340-L16 11.38 289.1 4.38 111.3
-22/-30 5/8"-18 D340-S20 10.34 262.6 D340-L20 13.25 336.6 6.50 165.1
-40/-48 7/8"-14 D340-S2428 10.92 277.4 D340-L2428 14.92 379.0 6.55 166.4
-60 1"-12 D340-S2832 11.75 298.5 D340-L2832 16.92 429.8 6.30 160.0

D340 Tip Turnbuckle Screws320 Turnbuckle Screws





ROD      SIZE THREAD STANDARD SCREW PART NUMBER S-LOA LONG SCREW PART NUMBER L-LOA THREAD LENGTH
in mm in mm in mm
                 
-4 1/4"-28 D320-S08 5.44 138.2 D320-L08 7.25 184.2 2.72 69.1
-4 5/16"-24 D320-S10 6.01 152.7 D320-L10 8.56 217.5 2.63 66.8
-6 3/8"-24 D320-S12 6.75 171.5 D320-L12 9.31 236.5 2.95 74.9
-8 7/16"-20 D320-S14 7.35 186.7 D320-L14 9.88 250.8 3.20 81.3
-10/-12 1/2"-20 D320-S16 8.39 213.1 D320-L16 11.88 301.6 3.65 92.7
-15/-17 5/8"-18 D320-S20 9.80 248.9 D320-L20 14.13 358.8 4.26 108.2
-22 3/4"-16 D320-S24 11.50 292.1 D320-L24 16.50 419.1 5.06 128.5
-30 7/8"-14 D320-S28 13.00 330.2 D320-L28 19.00 482.6 5.69 144.5
-40 1"-12 D320-S32 14.13 358.8 D320-L32 22.13 562.0 6.25 158.8
-48 1 1/8"-12 D320-S36 14.75 374.7 D320-L36 22.75 577.9 6.50 165.1
-60 1 1/4"-12 D320-S40 15.25 387.4 D320-L40 23.25 590.6 6.75 171.5

D540 & D541 Eye End





ROD SIZE PART       NUMBER THREAD SIZE PIN A B C D
in mm in mm in mm in mm in mm
                         
-4 D531-1012 5/16" 0.373 9.47 0.32 8.1 0.53 13.5 1.04 26.4 0.75 19.1
-6 D531-1214 3/8' 0.433 11.00 0.39 9.9 0.69 17.5 1.09 27.7 1.00 25.4
-8 D531-1416 7/16" 0.495 12.57 0.45 11.4 0.70 17.8 1.12 28.4 1.00 25.4
-10 D531-1616 1/2" 0.495 12.57 0.52 13.2 0.78 19.8 1.39 35.3 1.25 31.8
-12 D531-1620 1/2" 0.620 15.75 0.53 13.5 0.84 21.3 1.43 36.3 1.38 35.1
-15/17 D531-2020 5/8" 0.620 15.75 0.65 16.4 0.93 23.5 1.61 40.9 1.60 40.6
-22 D531-2424 3/4" 0.745 18.92 0.77 19.6 1.19 30.2 1.74 44.2 2.00 50.8
-30 D531-2828 7/8" 0.870 22.10 0.90 22.7 1.19 30.2 2.16 54.9 2.00 50.8
-40 D531-3232 1" 0.995 25.27 1.04 26.4 1.45 36.8 2.53 64.3 2.50 63.5
-48 D531-3636 1 1/8" 1.120 28.45 1.17 29.6 1.45 36.8 2.82 71.6 2.50 63.5
-60 D531-4040 1 1/4" 1.245 31.62 1.29 32.8 1.82 46.2 3.60 91.4 3.00 76.2
Standard lower end for C550 and C500 is the D531 LH eye end with toggle. Right version use D530 prefix

Spreader bends


Navtec Spreader Bends cover and protect the rod rigging that passes over the spreader tip. They are ideally suited to masts where shroud-spreader angle change is between 1 and 15 degrees. Spreader bends available in both alloy and stainless steel.




rod rigginG - Accessories

351 New Whitfield St Guilford, CT 06437-3400  USA (203) 458-3163 Fax (203) 458-9291    info@navtec.net

j200 toggles

ROD SIZE PART NUMBER PIN 1 PIN 2 A B C D E
    in mm in mm in mm in mm in mm in mm in mm
-4 J100-1210 0.375 9.53 0.311 7.90 0.37 9.3 0.38 9.5 0.83 21.1 0.45 11.4 1.80 45.7
-4 J100-1212 0.375 9.53 0.373 9.47 0.37 9.3 0.38 9.5 0.83 21.1 0.45 11.4 1.80 45.7
-6 J100-1412 0.437 11.10 0.373 9.47 0.43 10.8 0.41 10.3 0.90 22.9 0.63 16.0 2.00 50.8
-6 J100-1414 0.437 11.10 0.433 11.00 0.43 10.8 0.41 10.3 0.90 22.9 0.63 16.0 2.00 50.8
-8/-10 J100-1614 0.500 12.70 0.433 11.00 0.48 12.2 0.50 12.7 1.17 29.7 0.63 16.0 2.20 55.9
-8/-10 J100-1616 0.500 12.70 0.495 12.57 0.48 12.2 0.50 12.7 1.17 29.7 0.63 16.0 2.20 55.9
-12/-15/-17 J100-2018 0.625 15.88 0.561 14.25 0.61 15.4 0.63 15.9 1.21 30.7 0.79 20.1 2.50 63.5
-12/-15/-17 J100-2020 0.625 15.88 0.620 15.75 0.61 15.4 0.63 15.9 1.21 30.7 0.79 20.1 2.50 63.5
-22 J100-2420 0.750 19.05 0.620 15.75 0.73 18.5 0.75 19.1 1.47 37.3 0.92 23.4 2.90 73.7
-22 J100-2424 0.750 19.05 0.745 18.92 0.73 18.5 0.75 19.1 1.47 37.3 0.92 23.4 2.90 73.7
-30 J100-2824 0.875 22.23 0.745 18.92 0.84 21.3 0.81 20.6 1.68 42.7 1.18 30.0 3.30 83.8
-30 J100-2828 0.875 22.23 0.870 22.10 0.84 21.3 0.81 20.6 1.68 42.7 1.18 30.0 3.30 83.8
-40 J100-3228 1.000 25.40 0.870 22.10 0.96 24.4 1.00 25.4 2.08 52.8 1.18 30.0 3.70 94.0
-40 J100-3232 1.000 25.40 0.995 25.27 0.96 24.4 1.00 25.4 2.08 52.8 1.18 30.0 3.70 94.0
-48 J100-3632 1.125 28.58 0.995 25.27 1.09 27.7 1.06 26.9 2.26 57.4 1.45 36.8 4.10 104
-48 J100-3636 1.125 28.58 1.120 28.45 1.09 27.7 1.06 26.9 2.26 57.4 1.45 36.8 4.10 104
-60 J100-4036 1.250 31.75 1.120 28.45 1.21 30.7 1.25 31.8 2.65 67.3 1.45 36.8 4.50 114
-60 J100-4040 1.250 31.75 1.245 31.62 1.21 30.7 1.25 31.8 2.65 67.3 1.45 36.8 4.50 114
-76 J100-3840 1.250 31.75 1.183 30.05 1.25 31.8 1.38 34.9 2.50 63.5 1.50 38.1 4.56 116
-91 J100-4444 1.375 34.93 1.370 34.80 1.34 34.0 1.44 36.5 3.40 86.4 1.62 41.1 5.60 142
-115 J100-5050 1.562 39.67 1.557 39.55 1.52 38.7 1.78 45.2 3.12 79.2 1.88 47.6 5.69 145
-150 J100-5656 1.750 44.45 1.745 44.32 1.71 43.4 1.88 47.8 4.87 123.7 2.15 54.6 7.50 191
-170 J100-6060 1.875 47.63 1.870 47.50 2.13 54.1 1.95 49.5 4.16 105.7 2.38 60.5 7.20 183
-195 J100-6868 2.125 53.98 2.120 53.85 2.25 57.2 2.19 55.6 4.50 114.3 2.67 67.9 8.10 206
-220 J100-7272 2.250 57.15 2.245 57.02 2.50 63.5 2.44 62.0 4.46 113.3 2.70 68.6 8.46 215
-260 J100-7878 2.500 63.50 2.433 61.80 2.90 73.7 2.50 63.5 5.50 139.7 3.13 79.5 9.76 248
Nutted pins standard -60 and above, nutted pins available on smaller sizes

Toggles


Navtec toggles release fatigue stress and assist in allowing the load forces to align with the shroud angle.





D531 Turnbuckle Eye with Toggle

(left hand thread)




D530 Turnbuckle Eye with Toggle

(right hand thread)



D531 & D530 Eye End with Toggle





ROD SIZE INSULATOR BODY PART NUMBER THREAD SIZE LENGTH WEIGHT ROD CAP PART NUMBER EYE PART NUMBER JAW PART NUMBER
      in mm lbs kg    
-6 P100-10A 1/2-20 11.43 290 1.13 0.51 P101-08-006A G700-010J01 H120-161414
-8 P100-10A 1/2-20 11.43 290 1.13 0.51 P101-08-008A G700-010J01 H120-161616
-10 P100-10A 1/2-20 11.43 290 1.13 0.51 P101-08-010A G700-010J01 H120-161616
-12 P100-17A 5/8-18 13.67 347 2.88 1.31 P101-08-012A G700-017J01 H120-202020
-15 P100-17A 5/8-18 13.67 347 2.88 1.31 P101-08-015A G700-017J01 H120-202020
-17 P100-17A 5/8-18 13.67 347 2.88 1.31 P101-08-017A G700-017J01 H120-202020
-22 P100-22A 3/4-16 14.95 380 3.81 1.73 P101-08-022A G700-022J01 H120-242424
-30 P100-30A 7/8-14 16.5 419 5.50 2.49 P101-08-030A G700-030J01 H120-282828
-40 P100-40A 1-12 18.11 460 7.38 3.35 P101-08-040A G700-040J01 H120-323232
-48 P100-48A 1-12 19.64 499 10.81 4.90 P101-08-048A G700-048J01 H120-323636
-60 P100-60A 1 1/4-12 22.55 573 16.00 7.26 P101-08-060A G700-060-01 H120-404040
-76 P100-76A 1 3/8-12 24.41 620 19.00 8.62 P101-08-076L G700-075 H120-444040
-91 P100-91A 1 1/2-12 26.82 681 28.00 12.7 P101-08-091L G700-090 H120-484444
-115 P100-115A 1 3/4-12 27.39 696 38.00 17.2 P101-08-115L G700-115 H120-565050
Resistance ≥ 100 MΩ
Capacitance ≈ 60 pF
Electrical breakdown ≥ 8000V wet or dry (doused w/salt water & drained for approx. 1 second)
ROD SIZE PART NUMBER L U D T WEIGHT
in mm in mm in mm in mm lbs grams
                       
-4 L250-004 2.68 68.1 0.75 19.1 0.500 12.70 0.300 7.62 0.040 18
-6 L250-006 3.22 81.8 0.88 22.4 0.625 15.88 0.365 9.27 0.070 32
-8 L250-008 3.60 91.4 1.00 25.4 0.688 17.48 0.425 10.80 0.109 49
-10 L250-010 3.60 91.4 1.00 25.4 0.688 17.48 0.425 10.80 0.160 73
-12 L250-012 4.20 106.7 1.25 31.8 0.750 19.05 0.485 12.32 0.139 63
-15 L250-015 4.20 106.7 1.25 31.8 0.750 19.05 0.485 12.32 0.144 65
-17 L250-017 4.90 124.5 1.50 38.1 0.750 19.05 0.550 13.97 0.187 85
-22 L250-022 4.85 123.2 1.75 44.5 1.000 25.40 0.600 15.24 0.270 122
-30 L250-030 5.23 132.8 2.00 50.8 1.000 25.40 0.600 15.24 0.238 108
-40 L250-040 5.52 140.2 2.25 57.2 1.188 30.18 0.660 16.76 0.319 145
-48 L250-048 5.93 150.6 2.50 63.5 1.188 30.18 0.720 18.29 0.339 154
-60 L250-060 6.87 174.5 2.50 63.5 1.375 34.93 0.845 21.46 0.520 236
-76 L250-076 7.18 182.4 2.50 63.5 1.470 37.34 0.903 22.94 0.620 281
ROD SIZE PART NUMBER L U D T
    in mm in mm in mm in mm
-4 L200-004-24 1.30 33.0 0.75 19.1 0.500 12.7 0.300 7.6
-4 L200-004-32 1.55 39.4 1.00 25.4 0.500 12.7 0.300 7.6
-6 L200-006-28 1.41 35.8 0.88 22.4 0.625 15.9 0.365 9.3
-6 L200-006-32 1.53 38.9 1.00 25.4 0.625 15.9 0.365 9.3
-6 L200-006-48 2.03 51.6 1.50 38.1 0.625 15.9 0.365 9.3
-8 L200-008-32 1.98 50.3 1.00 25.4 0.688 17.5 0.425 10.8
-8 L200-008-40 2.23 56.6 1.25 31.8 0.688 17.5 0.425 10.8
-8 L200-008-64 2.98 75.7 2.00 50.8 0.688 17.5 0.425 10.8
-10 L200-010-32 1.98 50.3 1.00 25.4 0.688 17.5 0.425 10.8
-10 L200-010-40 2.23 56.6 1.25 31.8 0.688 17.5 0.425 10.8
-10 L200-010-64 2.98 75.7 2.00 50.8 0.688 17.5 0.425 10.8
-12 L200-012-40 2.15 54.6 1.25 31.8 0.750 19.1 0.485 12.3
-12 L200-012-48 2.40 61.0 1.50 38.1 0.750 19.1 0.485 12.3
-12 L200-012-64 2.90 73.7 2.00 50.8 0.750 19.1 0.485 12.3
-15 L200-015-48 2.46 62.5 1.50 38.1 0.750 19.1 0.505 12.8
-15 L200-015-64 2.96 75.2 2.00 50.8 0.750 19.1 0.505 12.8
-17 L200-017-48 2.50 63.5 1.50 38.1 0.750 19.1 0.550 14.0
-17 L200-017-56 2.75 69.9 1.75 44.5 0.750 19.1 0.550 14.0
-17 L200-017-64 3.00 76.2 2.00 50.8 0.750 19.1 0.550 14.0
-22 L200-022-56 3.10 78.7 1.75 44.5 1.000 25.4 0.600 15.2
-22 L200-022-64 3.35 85.1 2.00 50.8 1.000 25.4 0.600 15.2
-30 L200-030-64 3.15 80.0 2.00 50.8 1.000 25.4 0.600 15.2


L200 Aluminum Spreader Bend

D550 Turnbuckle Cover

Stainless Steel Turnbuckle CoverS


Stainless steel turnbuckle covers add the finishing touch to your boat. Covers for all turnbuckles come with a black Delrin tip to grip the rod or wire and a supporting gasket which threads onto the turnbuckle screw.






D500 Rod Body





D320 Turnbuckle Screws





ROD      SIZE PART    NUMBER THREAD  SIZE HOLE A LOA
in mm in mm in mm
               
-4 D541-1010 5/16" 0.313 7.95 0.28 7.1 3.55 90.2
-6 D541-1212 3/8' 0.370 9.40 0.34 8.7 4.05 102.9
-8/-10/-12 D541-1616 1/2" 0.495 12.57 0.47 11.9 5.23 132.8
-15/-17 D541-2020 5/8" 0.620 15.75 0.59 15.1 6.17 156.7
-22 D541-2424 3/4" 0.745 18.92 0.72 18.3 7.86 199.6
-30 D541-2828 7/8" 0.870 22.10 0.83 21.0 8.66 220.0
-40 D541-3232 1" 0.995 25.27 0.90 22.9 9.31 236.5
-48 D541-3636 1 1/8" 1.120 28.45 0.98 24.9 9.68 245.9
-60 D541-4040 1 1/4" 1.245 31.62 1.15 29.2 9.87 250.7
Standard lower end for C560 is the D541 LH eye end. Right version use D540 prefix

P100 Navtec Rigging Insulator


Designed for higher loading from rod rigging, the Navtec insulator delivers superior insulating and short-prevention characteristics in even the harshest conditions. Allows for better antenna tuning and radio performance.




L250 Stainless Steel Spreader Bend