L834 / L534 Micro Tip Cups

Available in N50 (L834) or titanium (L534) to reduce size and weight, each tip cup is designed to complement the specifi cation of the rig plan angles for optimal performance. Use in conjunction with the F235 Stem Ball on the verticals, for maximum articulation and life span. For part numbers, please contact Navtec with a rig plan

L500 Tip Cups

The standard in the Navtec line of spreader end tip cups. Incorporates Navtec Micro Stemballs for superior fatigue resistance. Fits completely inside the spreader to reduce sail chafe. Three-piece design ensures ease of installation.

LOWER ROD SIZE LOWER STEMBALL PART NUMBER LOWER WASHER PART NUMBER UPPER ROD SIZE UPPER STEMBALL PART NUMBER UPPER WASHER PART NUMBER DIAGONAL ROD SIZE DIAGONAL TURNBUCKLE PART NUMBER 
               
-4 F220-004 L401-03-041 -4 F220-004 L401-03-041 -4 C651-004-10B
               
-6 F220-006 L401-03-061 -4 F220-004 L401-03-041 -4 C651-004-10B
      -6 F220-006 L401-03-061 -4 C651-004-10B
      -6 F220-006 L401-03-061 -6 C651-006-10B
               
-8 F220-008 L401-03-101 -4 F220-004 L401-03-041 -4 C651-004-10B
      -6 F220-006 L401-03-061 -4 C651-004-10B
      -6 F220-006 L401-03-061 -6 C651-006-10B
      -8 F220-008 L401-03-101 -4 C651-004-10B
      -8 F220-008 L401-03-101 -6 C651-006-10B
      -8 F220-008 L401-03-101 -8 C651-008-10B
               
-10 F220-010 L401-03-101 -4 F220-004 L401-03-041 -4 C651-004-10B
      -6 F220-006 L401-03-061 -4 C651-004-10B
      -6 F220-006 L401-03-061 -6 C651-006-10B
      -8 F220-008 L401-03-101 -4 C651-004-10B
      -8 F220-008 L401-03-101 -6 C651-006-10B
      -8 F220-008 L401-03-101 -8 C651-008-10B
      -10 F220-010 L401-03-101 -4 C651-004-10B
      -10 F220-010 L401-03-101 -6 C651-006-10B
      -10 F220-010 L401-03-101 -8 C651-008-10B
               
-12 F235-012 L401-03-122 -6 F220-006 L401-03-061 -4 C651-004-10B
      -6 F220-006 L401-03-061 -6 C651-006-10B
      -8 F220-008 L401-03-101 -4 C651-004-10B
      -8 F220-008 L401-03-101 -6 C651-006-10B
      -8 F220-008 L401-03-101 -8 C651-008-10B
      -10 F220-010 L401-03-101 -4 C651-004-10B
      -10 F220-010 L401-03-101 -6 C651-006-10B
      -10 F220-010 L401-03-101 -8 C651-008-10B
      -12 F235-012 L401-03-122 -4 C651-004-10B
      -12 F235-012 L401-03-122 -6 C651-006-10B
      -12 F235-012 L401-03-122 -8 C651-008-10B
               
-15 F235-012-02 L401-03-122 -8 F220-008 L401-03-101 -4 C651-004-10B
      -8 F220-008 L401-03-101 -6 C651-006-10B
      -8 F220-008 L401-03-101 -8 C651-008-10B
      -10 F220-010 L401-03-101 -4 C651-004-10B
      -10 F220-010 L401-03-101 -6 C651-006-10B
      -10 F220-010 L401-03-101 -8 C651-008-10B
      -12 F235-012 L401-03-122 -4 C651-004-10B
      -12 F235-012 L401-03-122 -6 C651-006-10B
      -12 F235-012 L401-03-122 -8 C651-008-10B
One L400-001 tipcup assembly includestipcup plug,body & locking screw (no washers)
F220 stemballs, F235 stemballs & L401-03-XXX washers are sold separately.

L400-001 Tip Cups

Economical and flexible, the L400 is ideal for smaller boats in the 30-foot LOA range.  Two-piece modular design will accept most rod combinations up to -15 rod. Makes discontinuous rigging affordable for 24- to36-foot boats

Tip Cup

Navtec spreader tip cups are engineered for weight reduction and enduring strength. The range of product sizes and
designs provides a solution for sailboats of any length.

rod rigginG - Tip cups


351 New Whitfield St Guilford, CT 06437-3400  USA (203) 458-3163 Fax (203) 458-9291    info@navtec.net

L622 / L822 Grand Prix Ball Head Tip Cups

Available in N50 (L822) or titanium (L622), Navtec’s Grand Prix line of race tip cups uses ball head geometry on the rods to eliminate the need for stem balls, reducing the weight and overall size and windage. For part numbers, please contact Navtec with a rig plan

TIP CUP         PART NUMBER LOWER SHROUD ANGLE AL UPPER SHROUD ANGLE AU DIAGONAL SHROUD ANGLE AD
       
L500-XXYYZZ01 87° ± 3° 90° ± 3° 75° ± 3°
L500-XXYYZZ02 87° ± 3° 90° ± 3° 80° ± 3°
L500-XXYYZZ03 87° ± 3° 90° ± 3° 70° ± 3°
       
L500-XXYYZZ04 90° ± 3° 90° ± 3° 75° ± 3°
L500-XXYYZZ05 90° ± 3° 90° ± 3° 80° ± 3°
L500-XXYYZZ06 90° ± 3° 90° ± 3° 70° ± 3°
       
L500-XXYYZZ07 84° ± 3° 90° ± 3° 75° ± 3°
L500-XXYYZZ08 84° ± 3° 90° ± 3° 80° ± 3°
L500-XXYYZZ09 84° ± 3° 90° ± 3° 70° ± 3°
       
L500-XXYYZZ10 OUT OF RANGE OUT OF RANGE OUT OF RANGE
L500-XXYYZZ11 OF STANDARD OF STANDARD OF STANDARD
-------- ANGLES FROM ANGLES FROM ANGLES FROM
L500-XXYYZZ99 81° - 93° 87° - 93° 67° - 83°
"XX" represents the lower vertical roddash size (22,30,40,48,60,76 etc.)
"YY"represents the upper vertical rod dash size (22,30,40,48,60,76 etc.)
"ZZ"represents the diagonal tip turnbuckle screw size (10,12,14,16,20,24, etc.)